Roland VersaUV LEF2-200 Service Notes page 175

Limit Position & Maximum Scan Width Position Initialize
Workflow
C AUTION
• This is for adjusting the relative distance between the limit sensor and the capping position, and also detecting the
distance from the leftmost position of the print-head carriage movement to the limit sensor .
• When the limit position is not set correctly, it may cause some problems such as a head capping error .
• To prevent hardened ink from entering into the nozzle, refresh print head before the replacement . Perform medium
cleaning on all print heads if 20 minutes passes .
FUNCTION
CLEANING
MEDIUM CL.
• Always use the UV protection sheet during this adjustment, or ink will harden and clog inside the ink line .
1.
Turn on the main power switch and then the sub power switch while pressing the [] [] []keys to enter the limit
initialization mode .
SETTING UP
THE LIMIT
FUNCTION
CLEANING
MEDIUM CL.
AB
+
2-34
2
L EF 2-200