Roland VersaUV LEF2-200 Service Notes page 238

Grease Up Maintenance
Procedure
C AUTION
• To prevent hardened ink from entering into the nozzle, refresh print head before the adjustment . Perform medium
cleaning on all print heads if 20 minutes passes .
FUNCTION
CLEANING
MEDIUM CL.
• Always use the UV protection sheet during this adjustment, or ink will harden and clog inside the ink line .
• This maintenance is to grease the screws of the table UP/DOWN and the plate which fixes the head gap sensor plate . This
maintenance is required in every 6 months .
1.
Apply grease to the red-circled parts of the plate supporting the head gap sensor plate .
• Grease: FLOIL G-902 10ML
• Volume: proper amount
C AUT ION
Use the wiry tool since the gaps between the screws and the plate are small . Loosen the screws approximately 1/2 turn to
make the greasing easier .
1 . Head gap sensor plate
FUNCTION
CLEANING
MEDIUM CL.
AB
1
2-97
2
L EF 2-200