Roland VersaUV LEF2-200 Service Notes page 245

Front Cover Sensor Adjustment
3.
Perform [SERVICE MENU] > [SENSOR CHECK] and confirm the status of sensor [C] .
SERVICE MENU
SENSOR CHECK
HCPwFLRAT
* * ** *
4.
Remove the panel cover and the right top cover .
5.
Unlock the print-head carriage and move it slowly leftwards by hand .
6.
Loosen two screws that secure the front cover sensor half a turn .
7.
Tighten the screw clockwise until the status of the sensor [C] is ON . When the sensor is ON, [*] mark is displayed .
HCPwFLRAT
* * * * * *
[ ][ ]
2-104
2
L EF 2-200