Roland VersaUV LEF2-200 Service Notes page 224

UV Lamp Height Adjustment
4.
Turn on the main power switch . Then, turn on the sub power switch while pressing the [] [] []keys to enter the
service mode .
MENU
SERVICE MENU
5.
Perform [SERVICE MENU] > [MOTOR MENU] > [AXIS MOVE] > [HEIGHT] to set the Height to 103 mm .
C AUTION
Be sure that the table unit is in a position anterior to head gap sensor plate . When the table unit hits the plate, the table
cannot rise to 103 mm .
6.
Press the [] key to move the UV Lamp frontward .
+
MENU
2-83
2
L EF 2-200