Roland VersaUV LEF2-200 Service Notes page 168

Print Head Alignment
6.
Setup clear film on the machine .
C AUTION
Set the table height by auto detection .
7.
Select [SERVICE MENU] > [PRINT MENU] > [HEAD ADJUST] > [BIAS/VERTICAL] > [TEST PRINT], and press the [ENTER] key .
SERVICE MENU
PRINT MENU
PRINT MENU
HEAD ADJUST
HEAD ADJUST
BIAS/VERTICAL
BIAS/VERTICAL
TEST PRINT
8.
A test pattern is printed . The pattern of the test print changes depending on ink type .
NOTE
Press the [] key to move the table forward so that you can see the test pattern well . Press the [] key to move it back to
the original position .
K W K M K W K M
[ ] [ ]
[ ] [ ]
[ ]
[ ]
2-27
2
L EF 2-200