Roland VersaUV LEF2-200 Service Notes page 63

Ink Tube Replacement
16.
Attach the ink tubes and the tube guides to the holder cable plate and the support rail frame .
NOTE
Moving the print-head carriage to the right side of the machine will make it easier to remove the ink tubes .
17.
Bundle the ink tubes with the tube guides .
18.
Connect the ink tubes to the joint adapters, the Y-tube joints, and the circulation pump .
C AUTION
When you connect the ink tubes, the ink tubes may bend . Do not use the bent ink tube .
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
Damper sheild
Damper joint
Y-tube joint
1-56
1
L EF 2-200