Print Head Height Adjustment
1.
Before adjusting print head height, perform normal cleaning and manual cleaning .
NOTE
This step is to prevent the ink around the print head from rubbing off on the table when the print head is placed on the table
at step 14 .
FUNCTION
FUNCTION
CLEANING
CLEANING
NORMAL CL.
NORMAL CL.
AB
2.
Unlock the print-head carriage and move it slowly leftwards .
3.
Remove the carriage cover .
4.
Remove the carriage board cover .
1
C AUTION
Remove the carriage board cover by pushing the part indicated by the arrows because the top part of the support is easy to
break .
MENU
MENU
SUB MENU
MAINTENANCE
CLEANING
2
2-75
1 . Carriage board
2 . Carriage board cover
2
L EF 2-200