Roland VersaUV LEF2-200 Service Notes page 97

Carriage Belt Replacement
5.
Remove the screws as shown in the figure and remove the top cover .
Notes when attaching carriage cover
NOTE
When attaching the carriage cover, tighten four screws loosely first, then tighten them fully to secure the cover .
C AUT ION
When tightening the two screws on the front, be careful not to tighten them too hard . Doing so may cause the carriage
cover to be distorted and the print heads may become shifted .
1-90
1
L EF 2-200