Roland VersaUV LEF2-200 Service Notes page 179

Linear Encoder Setup
3.
Select [SERVICE MENU] > [PRINT MENU] > [LINEAR ENCODER] and press the [ENTER] key .
SERVICE MENU
PRINT MENU
PRINT MENU
LINEAR ENCODER
NOW PROCESSING
POS: 1361.00mm
4.
One of the messages appears at the completion of setup . In case of "SETUP FAILED", check the following .
LINEAR ENCODER
SETUP COMPLETED
LINEAR ENCODER
SETUP FAILED
LINEAR ENCODER
HEADBOARD FAILED
• Dirt/scratches on the encoder scale .
• Dirt/scratches on the encoder sensor .
• The encoder scale is not between the encoder sensor .
• There is a backlash between the scan motor gear and the drive gear .
• Fastening of the carriage and the carriage belt .
• Bad cable contact .
5.
(End of procedure)
[ ] [ ]
[ ]
．．．
2-38
2
L EF 2-200