Roland VersaUV LEF2-200 Service Notes page 57

Ink Tube Replacement
Workflow
C AUTION
• To prevent hardened ink from entering into the nozzle, refresh print head before the replacement . Perform medium
cleaning on all print heads if 20 minutes passes .
FUNCTION
CLEANING
MEDIUM CL.
• Always use the UV protection sheet during this adjustment, or ink will harden and clog inside the ink line .
• Cut the ink tubes to the following length . Put a color label on the end of each ink tube so that you will know which ink
tube to connect to which damper .
Ink tube length
No .1: 1780±5 mm
No .2: 1780±5 mm
No .3: 1600±5 mm
No .4: 1600±5 mm
No .5: 1750±5 mm
No .6: 1750±5 mm
No .7: 1480±5 mm
No .8: 1480±5 mm
FUNCTION
CLEANING
MEDIUM CL.
AB
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
1-50
1
L EF 2-200