Roland VersaUV LEF2-200 Service Notes page 170

Print Head Alignment
" When the upper lines are shifting towards the left of the lower lines, turn the screw CW .
" When the upper lines are shifting towards the right of the lower lines, turn the screw CCW .
12.
Tighten the screws that secure the print head in the reverse order of loosening, using the torque driver (Torque value:
20cN·m) .
C AUTION
Be careful not to tighten them too hard .
Top view
2
3
1
Vertical Adjustment
13.
Loosen three screws that secure the print head in the order as shown below .
C AUTION
Loosen the screws that secure the print head approximately 1/2 turn . If the screws are too loose, it may affect the result of
this alignment .
Top view
2
1
3
2-29
2
L EF 2-200