Roland VersaUV LEF2-200 Service Notes page 261

Error Code
Code Error Name
Linear encoder
0107
setup error
0109 Wiper error
0110 Linear encoder error
Cartridge IC driver
0112
error
Thermistor error
0148
(print head)
UV lamp connection
0210
error
Contents Cause
Linear encoder setup has not
Linear Encoder Setup has been done.
not been done. Linear encoder setup is ended
before it is completed.
Wiper motor error
Defect of the wiper unit
Wiper unit does not work
Defect of the wiper sensor
correctly.
Cut-line or short-circuit of cable
and flexible cable
Read error of the linear encoder.
Read error of the encoder on
There is a problem in
the scan motor side.
reading the linear encoder.
Belt is not fixed to the head
carriage firmly.
Cartridge IC driver has a
It is not possible to problem (not working).
communicate with the The communication wire of the
cartridge IC driver. cartridge IC driver cable has
short circuited or cut-line.
There is a bad connection
between the Cyan head and
the print carriage board (CN18).
There is a problem with
There is a bad connection
the thermistor on the Cyan
between the print carriage
head.
board (CN2) and the head
board (CN1).
The Cyan head is broken.
There is a bad connection
between the UV lamp and the
print carriage board.
There is a bad connection
between the DC junction board
and the signal junction board.
The UV lamp is not
The print carriage board is
connected / tuned on.
broken.
The DC junction board is
broken.
The signal junction board is
broken.
The UV lamp is broken.
Action
Carry out Linear encoder setup in service menu.
Wiper motor replacement
Wiper unit replacement
Wiper sensor replacement
Cable and flexible cable replacement
Confirm whether the encoder scale is between the
slit of the encoder module in a whole width of the
printer.
Check cable connection between the linear encoder
board and the head board.
Confirm connection between the belt and the
carriage.
Linear encoder replacement
Scan motor replacement
Servo board replacement
Main board replacement
Ink cartridge IC sensor replacement
Check cable connection between the print head and
the print carriage board (CN18).
Check cable connection between the print carriage
board (CN2) and the head board (CN1).
Cyan head replacement
Check cable connection between the UV lamp and
the print carriage board.
Check cable connection between the DC junction
board and the signal junction board.
Print carriage board replacement
DC junction board replacement
Signal junction board replacement
UV lamp replacement
4-4
4
L EF 2-200