Roland VersaUV LEF2-200 Service Notes page 86

Board Replacement
11.
Tighten two screws .
12.
Attach the chassis and the covers, and perform the following adjustment .
12-1.
Battery installation
" Refer to Chapter 1 "Battery Replacement" .
12-2.
Firmware installation
" Refer to Chapter 2 "Firmware Upgrade", "Firmware Installation" .
12-3.
System parameter initialization
" Refer to Chapter 2 "Firmware Upgrade", "Firmware Installation" .
12-4.
IP address setting
* Start the machine with the service mode and set in the user menu .
12-5.
Put parameters
" Refer to Chapter 2 "Firmware Upgrade", "Firmware Installation" .
12-6.
Time and date setting
* Set the date and time in [SUB MENU] > [CLOCK] > [DATE] > TIME] .
* Set [DATE] in the order of [Year/Month/Day] .
12-7.
Sensor check
* [SERVICE MENU] > [SENSOR CHECK]
13.
Perform the following when parameters cannot be transferred by Peck .
13-1.
Battery installation
" Refer to Chapter 1 "Battery Replacement" .
13-2.
Firmware installation
* Refer to Chapter 2 "Firmware Upgrade", "Firmware Installation" .
13-3.
System parameter initialization
* Refer to Chapter 2 "Firmware Upgrade", "Firmware Installation" .
13-4.
Time and date setting
" Refer to Chapter 2 "Firmware Upgrade", "Firmware Installation" .
* Set the date and time in [SUB MENU] > [CLOCK] > [DATE] > TIME] .
* Set [DATE] in the order of [Year/Month/Day] .
1-79
1
L EF 2-200