Roland VersaUV LEF2-200 Service Notes page 78

Ribbon Cable (Main Board to Print Carriage Board) Replacement
20.
Connect the ribbon cables to the print carriage board .
21.
Attach the tube guide to the print-head carriage together with the ink tubes .
22.
Bundle the ink tubes with the clamps . Bundle the ink tubes with the clamps while pushing the ink tubes backward so as
not to locate the front of the print-head carriage .
C AUTION
If you do not bundle the ink tubes as shown in the figure, the ink tubes would pull up the print-head carriage and the print-
head carriage would be tilted .
No. 1～2
No. 1～4
23.
Attach the print carriage board cover .
C AUTION
Attach the print carriage board cover by pushing the part indicated by the arrows because the top part of the support is
easy to break .
No. 3～4
No. 3～6
No. 7～8
No. 5～8
No. 1～4
No. 5～8
1-71
1
L EF 2-200