Roland VersaUV LEF2-200 Service Notes page 202

LED Pointer Position Adjustment
4.
After the test print, the print-head carriage moves above the test pattern automatically .
C AUTION
When the LED pointer position is not adjusted, the value of the LCD will be displayed as [****] .
****
S: >
****
F: >
5.
Move the print-head carriage to the position where the LED pointer points the centermost square of the test pattern by
pressing the [] [] []] [] keys . Then, press the [ENTER] key to update the LED pointer position . When you press the
[MENU] key, the LED pointer position is not updated and exiting the menu .
****
S: > +0.3mm
****
F: > -0.1mm
6.
Perform "Chapter 2 Print Area Adjustment" .
7.
(End of procedure)
[ ]
2-61
2
L EF 2-200