Roland VersaUV LEF2-200 Service Notes page 225

UV Lamp Height Adjustment
7.
Move the print-head carriage slowly to the position which UV lamp slider unit is placed inside of the print area .
C AUTION
Move the print-head carriage to the position where the head surface does not hit the table plate .
1 . Slider unit
8.
Remove the UV lamp unit together with the plate .
9.
Loosen four screws to set the gap between the bottom of the UV lamp stay and the top of the table plate to [7 .8 mm] .
1 . UV lamp stay
1
Print area
1
7.8 mm
2-84
2
L EF 2-200