Roland VersaUV LEF2-200 Service Notes page 193

Belt Position Adjustment
Belt aging
3.
Select [SERVICE MENU] > [MOTOR MENU] > [AGING] > [SCAN]], and press the [ENTER] key .
SERVICE MENU
MOTOR MENU
MOTOR MENU
AGING
AGING
SCAN
4.
Check the position of the belt . The position is proper when the belt is not touching the flanges excessively . When positioning
is correct, end this belt position adjustment . When positioning is not correct, perform the following adjustment .
NOT E
Belt partly touching the flange is acceptable .
Left end of the belt
Right end of the belt
[ ]
[ ]
[ ]
2-52
2
L EF 2-200