Roland VersaUV LEF2-200 Service Notes page 204

Print Area Adjustment
1.
Turn on the main power switch . Then, turn on the sub power switch while pressing the [] [] [] keys to enter the
service mode .
MENU
SERVICE MENU
2.
Select [SERVICE MENU] > [PRINT MENU] > [PRINT AREA ADJ .], and press the [ENTER] key . The print-head carriage moves to
above the table automatically .
SERVICE MENU
PRINT MENU
PRINT MENU
PRINT AREA ADJ.
3.
Move the print-head carriage to the position where the LED pointer points lower right of the print area by pressing the
[] [] [] [] keys . Then, press the [ENTER] key . If you press the [MENU] key, the lower right position of the print area is
not updated and go back to the exiting the menu .
****
S:
****
F:
+
MENU
[ ] [ ]
[ ]
> +0.3mm
> -0.1mm
[ ]
Print area
2-63
2
L EF 2-200