Roland VersaUV LEF2-200 Service Notes page 133

Head Gap Sensor Replacement
1.
Turn on the main power switch . Then, turn on the sub power switch while pressing the [] [] [] keys to enter the
service mode .
MENU
MENU
SERVICE MENU
2.
Select [SERVICE MENU] > [MOTOR MENU] > [AXIS MOVE] > [FEED], and set the value to [Y: 2 .8 mm] to move the table unit
to the rear .
SERVICE MENU
MOTOR MENU
MOTOR MENU
AXIS MOVE
AXIS MOVE
FEED
AXIS MOVE
Y:2.8mm
3.
Turn off the power switch and open the front cover . Then remove the cover .
+
[ ] [ ]
[ ]
[ ]
[ ]
1-126
1
L EF 2-200