Capping Position Adjustment - Roland Advanced Jet AJ-1000 Service Notes

4-5 CAPPING POSITION ADJUSTMENT

CAPPING POSITION ADJUSTMENT is to adjust the height of Heads when they are capped.
It must be done when you remove or replace a cap or Head Carriage.
If this adjustment has not been done there is a possibility that the surface of Head is dries up.
Remove Right I/S Cover
1
Lower Pinch Rollers.
2
Make sure to unload the media when it is set on the
machine.
Then, turn on SUB POWER SW while pressing [
[ ] and [ ] keys to enter SERVICE MODE.
Select [I/S MENU] > [CAP ADJUST] in SERVICE MENU and
3
press [ ] key.
[ ], [
],
MENU
SERVICE MENU
SERVICE MENU
I/S MENU
I/S MENU
CAP ADJUST
4-29
Right I/S Cover
], [ ] + POWER ON
[MENU] key