Roland VersaUV LEF2-200 Service Notes page 276

Installation Checklist
4.□
Apply head refreshing cleaning liquid to the head cleaning sheet .
NOTE
• As a guideline, apply 2 drops of cleaning liquid to a single cleaning pad. Apply 1 drop of cleaning liquid in each location,
using the holes in the sheet retaining cover (8 holes in the front and 8 holes in the back for a total of 16 holes) as guidelines
for the positions where to apply the liquid.
• Soak the cleaning liquid into the entirety of the head cleaning sheet covering the wiping part. Rubbing the print heads with
a dry sheet may lead to malfunctions.
5.□
After head refreshing is finished, open the sheet retaining cover and remove the head cleaning sheet .
6.□
(End of procedure)
• When normal cleaning is not effective
• Manual cleaning
□ □
Advanced maintenance
• Restoring the white ink concentration
• Handling severe dot drop-out and dot displacement
□ □
Replacing consumable parts
• Replacing method of consumable parts
• Replace the filter
• Replacing the cleaning pad unit
• Inquiry about consumable parts
5-11
5
L EF 2-200