Toro Twin Cylinder Engine Replacement - Toro Z MASTER 2000 Series Service Manual

Toro Twin Cylinder Engine Replacement

Toro Twin Cylinder Engine Removal
2000 Series Z MASTER® Service Manual
3438-778 Rev A
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop and remove the key. Engage the
parking brake.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Close the fuel supply valve.
4. Remove the engine guard.
5. Remove the mower belt.
6. Remove the hydrostatic drive belt from the engine pulley.
Belt Replacement (page 7–8)
7. Disconnect the chassis wire harness from the main engine wire harness.
g335893
8. Disconnect the red (B+) wire from the starter.
g335895
9. Disconnect the black engine ground wire.
Mower Belt Replacement (page 6–6)
Figure 5
Figure 6
Page 4–5
Hydrostatic Drive
Engine: Service and Repairs