Fpc Terminology; Figure 17: Fpc5 Supported By The Router - Juniper T4000 Hardware Manual

Copyright © 2013, Juniper Networks, Inc.
The T4000 FPC5 (T4000-FPC5-3D and T4000-FPC5-LSR) is shown in
Figure 17 on page 33.

Figure 17: FPC5 Supported by the Router

FPC Terminology

Regardless of whether you are holding an FPC vertically or horizontally, this document
uses the same terms for all four edges of the FPC (see
Faceplate—Edge of the FPC that has slots into which you insert the PICs
Connector edge—Edge opposite the faceplate; this edge has the connectors that attach
to the midplane
Top edge—Edge at the top of the FPC when it is vertical
Bottom edge—Edge at the bottom of the FPC when it is vertical
Chapter 3: T4000 Hardware Components Overview
Figure 18 on page 34):
33