M320 Fpc Terminology - Juniper M320 Hardware Manual

M320 Router Hardware Guide
Related
Documentation

M320 FPC Terminology

114
41
1 Empty
2 Online
41
3 Empty
4 Empty
5 Empty
6 Empty
7 Empty
For more detailed output, add the
a slot number ( ), which is optional:
0
user@host> show chassis fpc detail 0
Slot 0 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time:
Uptime:
seconds
For further description of the output from the commands, see the Junos OS System
Basics and Services Command Reference.
M320 Chassis Description on page 6
M320 Flexible PIC Concentrator (FPC) Description on page 11
M320 Craft Interface FPC LEDs and Online/Offline Buttons on page 32
Troubleshooting the M320 FPCs on page 131
Replacing an M320 FPC on page 175
Regardless of whether you are holding an FPC vertically or horizontally, this document
uses the same terms for all four edges of the FPC (see Figure 56 on page 115):
Faceplate—Edge of the FPC that has slots into which you insert the PICs
Connector edge—Edge opposite the faceplate; this edge has the connectors that attach
to the midplane
Top edge—Edge at the top of the FPC when it is vertical
Bottom edge—Edge at the bottom of the FPC when it is vertical
37 3 0
detail option. The following example also specifies
Online
37 degrees C / 98 degrees F
256 MB
28 MB
256 MB
2003-10-01 04:19:30 PDT
10 days, 7 hours, 16 minutes, 48
Copyright © 2010, Juniper Networks, Inc.
256 8