M320 Multiservice Edge Router Hardware Guide
Overview of Connecting the M320 Router to Management and Alarm Devices
164
For management and service operations, you connect the Routing Engine to an external
console or management network through ports on the Connector Interface Panel (CIP).
You can also connect the router to external alarm-reporting devices through the alarm
relay contacts on the CIP.
After you have installed the router into the rack, attach one or more external devices to
the ports on the CIP that connect to the Routing Engines for management and service
operations (see
Figure 58 on page
Figure 58: Routing Engine Management Ports and Alarm Relay Contacts
164).
Copyright © 2015, Juniper Networks, Inc.