Connecting The T640 Router To A Network For Out-Of-Band; Management; Figure 68: Routing Engine Management Ports And Alarm Relay Contacts - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide
Connecting the T640 Router to a Network for Out-of-Band Management
118

Figure 68: Routing Engine Management Ports and Alarm Relay Contacts

Connecting the T640 Router to a Network for Out-of-Band Management on page 118
Connecting the T640 Router to a Management Console or Auxiliary Device on page 119
Connecting the T640 Router to an External Alarm-Reporting Device on page 119
Connecting PIC Cables to the T640 Router on page 120
To connect the Routing Engine to a network for out-of-band management, connect an
Ethernet with RJ-45 connectors to the
with the router.
Turn off the power to the management device.
1.
ETHERNET port on the CIP. One cable is provided
Copyright © 2010, Juniper Networks, Inc.