Packing M320 Router Components For Shipment - Juniper M320 Hardware Manual

M320 Router Hardware Guide
Related
Documentation

Packing M320 Router Components for Shipment

Related
Documentation
284
If you are not using a mechanical lift and the router weight is fully supported by a
shelf or another router, unscrew and remove the mounting screws from the rack.
Three people can then lift the router and move it to the shipping crate.
If you are not using a mechanical lift and the router weight is not fully supported by
a shelf or another router, three people should grasp the router while a fourth person
unscrews and removes the mounting screws from the rack. The three lifters can
then move the router to the shipping crate.
Place the router in the shipping crate or onto the pallet. If on a pallet, bolt the router
9.
to the pallet.
Cover the router with an ESD bag and place the packing foam on top of and around
10.
the router.
Replace the accessory box on top of the packing foam.
11.
Securely tape the box closed or place the crate cover over the router.
12.
Write the RMA number on the exterior of the box to ensure proper tracking.
13.
M320 Router Description on page 3
M320 Return Procedure on page 281
Contacting Customer Support on page 281
Preventing Electrostatic Discharge Damage to an M320 Router on page 214
To pack and ship individual components:
When you return components, make sure they are adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
Use the original shipping materials if they are available.
Place individual boards in electrostatic bags.
Write the RMA number on the exterior of the box to ensure proper tracking.
CAUTION: Do not stack any of the router components.
M320 Chassis and Interface Alarm Messages on page 127
Preventing Electrostatic Discharge Damage to an M320 Router on page 214
Contacting Customer Support on page 281
Copyright © 2010, Juniper Networks, Inc.