Setting The Zero Reset - Omron ZW-8000 Series User Manual

Setting the Zero Reset

Setting the Status
Setting the Status p.169
As an example, here is an explanation of the procedure for selecting the "ON" (Enabled) zero reset type setting.
Operating procedure
Steps Key operation
1
2
3
4
5
6
7
8
256
Setting the Output Conditions
Display Description
Press and hold the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
Press the
Press the
Press the
key.
Press the
key.
Press the
key.
Set zero reset ON/OFF.
The current setting value is displayed on the sub-display.
Press
In this example, select "ON" and press the
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
key for two seconds or more to enter the
/ key to select MEAS, then press the
/ key to select TASK1, then press the
/ keys to select "OUTPUT" and press the
/ keys to select "ZERO" and press the
/ keys to select "STATUS" and press the
/ key to enter editing mode and the sub-display blinks.
key for two seconds or more to enter the
key.
key.
key.
ZW-8000/7000/5000
User's Manual