Calibration Rom - Omron ZW-8000 Series User Manual

Calibration ROM

This ROM is associated with the sensor on a one-to-one basis, and operates connected to the Sensor
Controller.
No. Names
1 Serial number
Important
• Use with the Calibration ROM always connected. If the Calibration ROM is not connected, the error message
"SYSERR" is shown in the main digital and "NO.ROM" is shown in the sub digital, where measurement is not
possible.
Errors Common to All Communication States p.280
• If the Calibration ROM is lost or broken, as a provisional measure, the measurement can be resumed using the data
of the previously read Calibration ROM. For the operating procedure, refer to page
5-3 Recovering Calibration ROM data p.195
58
Part Names and Functions
Functions
Serial number.
Only a Sensor Head with the same serial number is available.
1
p.195
.
ZW-8000/7000/5000
User's Manual