Omron ZW-8000 Series User Manual page 167

● Setting TIMING input mode
If you select External input as the trigger method, set the TIMING input mode. The data sampled when TIMING
input is turned ON varies with each TIMING input mode.
Setting item Setting value
TIMING Specify timing to
input mode measure
Specify timing to
exposure
 Multi View Explore
→ Edit pane
→ IO Settings window
1
Set the TIMING input mode.
ZW-8000/7000/5000
User's Manual
Description
The data of which measurement has been completed while TIMING input was ON is sampled. The
time from TIMING input to measurement value output is shorter compared to "Specify timing to
exposure" mode, this is suitable for performing height measurements with the Sensor Head and
measurement target in a resting state.
Example of when the Hold mode is set to sample
ON
TIMING input signal OFF
Exposure
Exposure (1)
process
Internal
process
Measuring
Measurement (0)
of the
process
sensor
Output
rocess
The data of which exposure has been completed while TIMING input was ON is sampled. Since
measurement values of the intended locations on the measurement target can be obtained with
TIMING input, this is suitable for performing shape measurements while moving the Sensor Head or
measurement target.
Example of when the Hold mode is set to sample
ON
TIMING input signal OFF
Exposure
Exposure (1)
process
Internal
Measuring
process
process Measurement (0)
of the
sensor
Output
process
: [Bank Group] | [(Bank Data Name)] (double click)
: [IO Settings] icon (
: [Control input]
Exposure (2) Exposure (3) Exposure (4) Exposure (5) Exposure (6)
Measurement (1) Measurement (2) Measurement (3) Measurement (4) Measurement (5)
Output measuring value
Exposure (2) Exposure (3) Exposure (4) Exposure (5) Exposure (6)
Measurement (1) Measurement (2) Measurement (3) Measurement (4) Measurement (5)
)
Setting the Output Conditions
Output (2)
Output (4)
Output
measuring
value
165