Omron ZW-8000 Series User Manual page 268

Operating procedure
Steps Key operation
1
2
3
4
5
6
7
8
9
266
Setting Threshold Value
Display Description
Press and hold the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222)
Press the
Press the
Press the
key.
Press the
key.
Select HIGH THRESHHOLD as the threshold value type.
Press the
key.
The current measured value is displayed on the main display and the
current set threshold value is displayed on the sub-display. (At this
time, the THRESHOLD-H indicator lights up.)
Press the
lower line in the main display.
−
Press the
When the key is pressed, the current measurement value of the
main digital is displayed on the lower line.
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
key for two seconds or more to enter the
/ key to select MEAS, then press the
/ key to select TASK1, then press the
/ key to select JUDGE, then press the
/ key to select TEACH, then press the
/ key to select H.JUDGE, then press the
key to display the current measured value on the
key to start a teaching.
key for two seconds or more to enter the
key.
key.
ZW-8000/7000/5000
User's Manual