Omron ZW-8000 Series User Manual page 291

ZW-S8010
Accessories 1 Calibration ROM fixing screws (M2 × 5
mm), Fiber cable protective cap (1), Strap
(1), Instruction Manual, Precautions
*1: Indicates the distance from the front of the sensor head. The pen-shaped right angle type has a maximum individual difference of ±0.15
mm in the distance from the front of the sensor head.
*2: The measurement range is higher 100
*3: Capacity value when OMRON standard mirror surface target is measured at the measurement center distance as the average of 16,384
times
When connected with the Sensor Controller for the Export Control Trade Ordinance (ZW-8000T), the minimum resolution is 0.25
regardless of the Sensor head or setting condition.
*4: Material setting for the OMRON standard mirror surface target: Error from an ideal straight line when measuring on mirror surface.
*5: Capacity value defined by 1/e
*6: When an extension fiber cable of 2 m or longer is connected, the setting rage of the measurement cycle (exposure time) changes. For
details, refer to "Setting the Measurement Cycle" p.122 in this manual.
*7: Actual value of the change in measurement value at the measurement center distance when fastened with an aluminum jig between the
Sensor Head and the target, and with the Sensor Head and the Sensor Controller set in the same temperature environment.
The value in parentheses is the actual value when using an SUS304 jig.
When measuring the thickness, the value is calculated from the difference between the heights of the surface and rear surface, so there is
no effect on the temperature change.
● ZW-S7010/S7020/S7030/S7040/SP7007/SP7010/SPR7007/SPR7010
ZW-S7010
Sensor controller ZW-7000@
Sensor head type Square-shaped straight type
Measurement center 10 mm
*1
distance
*2
Measuring range ±0.5 mm
*3 0.004 μm
Static resolution
*4
±0.45 μm
Linearity
*5 50 μm dia.
Spot diameter
*6 20 μs to 400 μs
Measuring cycle
Operating ambient Illumination on object surface max.30000 Lx: (incandescent light)
illumination
Ambient temperature Operation: 0 to 50°C, Storage: -15 to +60°C
range (No freezing and condensation)
Ambient humidity Operation/storage: 35 to 85% (No condensation)
range
Degree of protection IP40 (IEC60529)
Vibration resistance 10 to 150 Hz (half amplitude 0.35 mm), 80 mins in each of X/Y/Z directions
(destructive)
Shock resistance 150 m/s
(destructive)
0.6 μm/°C
Temperature charac-
*7
(0.2 μm/°C)
teristic
LED safety Risk Group1 (IEC62471)
Material Chassis: aluminum die cast
Fiber cable sheath: PVC
Calibration ROM: PC
Fiber cable length 0.3 m, 2 m (flex-resistant cable)
Fiber cable minimum 20 mm
bend radius
Insulation resistance Between case and all terminals: 20 MΩ (by 250 VDC)
(Calibration ROM)
ZW-8000/7000/5000
User's Manual
ZW-S8020 ZW-S8030
μ
s than measurement cycle.
2
(13.5%) of the peak optical intensity of the measurement wavelength.
ZW-S7020 ZW-S7030
20 mm 30 mm
±1 mm ±2 mm
0.008 μm 0.016 μm
±0.9 μm ±2.0 μm
70 μm dia. 100 μm dia. 120 μm dia. 130 μm dia. 170 μm dia. 150 μm dia. 190 μm dia.
2
, 6 direction, 3 times each (up/down, left/right, forward/backward)
1.1 μm/°C 1.8 μm/°C
(0.5 μm/°C) (1.0 μm/°C)
ZW-SP8007 ZW-SP8010
Installation plate (1), 4 unit fixing screws (M2 × 10 mm), 1
Calibration ROM fixing screw (M2 × 5 mm), Fiber cable
protective cap (1), Strap (1), Instruction Manual,
Precautions
ZW-S7040 ZW-SP7007 ZW-SP7010 ZW-SPR7007 ZW-SPR7010
Pen-shaped straight type
40 mm 7 mm 10 mm
±3 mm ±0.3 mm ±0.7 mm
0.024 μm 0.004 μm 0.006 μm
±3.0 μm ±0.45 μm ±0.7 μm
2.1 μm/°C 0.8 μm/°C 0.8 μm/°C
(1.2 μm/°C) (0.4 μm/°C) (0.4 μm/°C)
Chassis: SUS
Fiber cable sheath: PVC
Calibration ROM: PC
Mounting Plate: Aluminum
Specifications and External Dimensions
ZW-SPR8007 ZW-SPR8010
μ
m,
Pen-shaped right angle
type
7 mm 10 mm
±0.3 mm ±0.7 mm
0.006 μm 0.009 μm
±0.7 μm ±1.1 μm
0.8 μm/°C 0.8 μm/°C
(0.4 μm/°C) (0.4 μm/°C)
Chassis: SUS, aluminum
Fiber cable sheath: PVC
Calibration ROM: PC
Mounting Plate: Aluminum
289