When installing with recommended installation jig (Misumi SHMPS12)
1
Place the sensor head between the 2 parts of the recommended installation jig (Misumi SHMPS12
series).
2
Fix it by tightening the M4 fixing screws.
Tightening torque: 1.2 N · m
● ZW-SP Series
Fix the recommended jig within the shaded area in the figure below.
● ZW-SP Series
38.1
6.5
Prepare screws, as they are not supplied with Misumi installation jigs.
When installing with customer-manufactured jig
● ZW-SP Series
ZW-8000/7000/5000
User's Manual
M4 screw × 2
Basic Operations for Displaying Measurement Results
● ZW-SPR Series
M4 screw × 2
● ZW-SPR Series
44.1
19.5
● ZW-SPR Series
31