Setting the Average Filter
Setting the Average Filter p.154
As an example, here is an explanation of the procedure for selecting the "128" average count setting.
Operating procedure
Steps
Key operation
1 to 4
For moving to "FILTER", see steps 1 to 4 on p.242.
5
6
7
ZW-8000/7000/5000
User's Manual
Display
Description
Select "AVE" as the filter type.
Press the
Select the average count.
The current setting value is displayed on the sub-display.
Press
In this example, select "128" and press the
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
/
keys to select "AVE" and press the
/
key to enter editing mode and the sub-display blinks.
key for two seconds or more to enter the
Setting the Output Conditions
key.
key.
243