Clearing the Bank Settings
Clear (initialize) the setting of the currently selected bank.
Clearing the Bank Settings p.188
Important
Operations on the Sensor Controller do not initialize system settings and settings displayed in RUN mode.
Operating procedure
Steps
Key operation
1
2
3
4
5
264
Setting the Banks
Display
Description
Press and hold the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222)
Press the
Press the
key.
"OK/CAN" is displayed on the sub-display.
Press the
cancel.
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
key for two seconds or more to enter the
/
key to select BANK, then press the
/
keys to select "BK.CLR" and press the
key to clear the settings or the
key for two seconds or more to enter the
key.
key to
ZW-8000/7000/5000
User's Manual