Connection Compatibility - Omron ZW-8000 Series User Manual

Connection Compatibility

Connected to Other connection
ZW-8000@
EtherCAT
ZW-7000@
ZW-5000@
EtherCAT ---
EtherNet/IP Not compatible
Ethernet Compatible
(no-protocol)
RS-232C Compatible
(no-protocol)
Important
• EtherCAT and EtherNet/IP connections cannot be used at the same time.
• Can be connected simultaneously via Ethernet with PC tools (Sysmac Studio, SmartMonitorZW) and another
device (PLC etc). Can be connected simultaneously via Ethernet with PC tools (Sysmac Studio, SmartMonitorZW)
and another device (PLC etc). The port number for the PC tool is 9600 (fixed) and 9602 (fixed). When connecting
different devices, set the port number to other than 9600 and 9602 (default value is 9601).
Product Model
ZW ZW-8000@/7000@/
5000@
PC Tool Sysmac Studio Standard
Edition
• SYSMAC-SE200D
• SYSMAC-SE200D-64
• SYSMAC-SE201L
• SYSMAC-SE2@@L
Sysmac Studio
Measurement Sensor
Edition
• SYSMAC-NE00@L
Special EtherCAT Cable Refer to 10-1
Specifications and
Dimensions
General-purpose Ethernet ---
cable
Special I/O Cable For connecting to a PLC
or programmable terminal
• ZW-XPT2
For connecting to a PC
• ZW-XRS2
ZW-8000/7000/5000
User's Manual
EtherNet/IP
Not compatible
---
Compatible
Compatible
Application
This Displacement Sensor performs measurements.
This is the setup application. It is part of the Sysmac Studio Package and it
runs on Windows.
The Sysmac Studio comes in two different editions.
• Sysmac Studio Standard Edition
(unlicensed, media
The Sysmac Studio provides an integrated development environment for
only, 32-bit version
the NX/NJ series Controllers and other Machine Automation Controllers
DVD)
and EtherCAT Slaves. It supports setup, programming, debugging,
operation, and maintenance.
(unlicensed, media
The Sysmac Studio Standard Edition DVD includes Support Software for
only, 64-bit version
EtherNet/IP, DeviceNet, serial communications, and PT screen design
DVD)
(CX-Designer). Refer to the Sysmac catalog (Cat. No. P072) for details.
• Sysmac Studio Measurement Sensor Edition
(1-license edition)
This license provides the functions that are required to set up ZW-8000/
7000/5000 Series Vision Sensors from the Sysmac Studio. This model
(multilicense editions
number is for the license only. You must also purchase the DVD for the
(3, 10, 30, or 50
Sysmac Studio Standard Edition Ver.1.15 or higher.
licenses))
(1 or 3 licences)
The Special EtherCAT Cable connects the Sensor to another Sensor or to
another EtherCAT device.
Prepare commercially available Ethernet cable
satisfying the following requirements:
• Category 5e or more, 30 m or less
• RJ45 connector (8-pin modular jack)
• For direct connection: Select cross cable.
• For connection through an industrial switching hub: Select straight cable.
Connect the sensor with a PLC, programmable terminal, or personal
computer etc..
Ethernet RS-232C
(no-protocol) (no-protocol)
Compatible Compatible
Compatible Compatible
--- Compatible
Compatible ---
Parallel I/O Cable
Compatible
Compatible
Compatible
Compatible
System Configuration
55