Setting The Synchronous Measurement Mode - Omron ZW-8000 Series User Manual

Setting the Synchronous Measurement Mode

3-1 Setting the Measurement Start Timing p.96
Operating procedure
Steps Key operation
1
2
3
4
5
For more detail, refer to the following.
7-1 Connecting Parallel I/O in Confocal Fiber Type Displacement Sensor.
272
Setting the System
Display Description
Press and hold the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222)
Press the
key.
Press the
key.
Select the Trigger mode.
AUTO: Internal synchronous measurement mode
PARA.IN: External synchronous measurement mode
ECT.PDO: PDO synchronous measurement mode
The current settings are displayed on the sub digital.
Press the
display blinks.
In this example, select "PARA.IN" and press the
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
key for two seconds or more to enter the
/ keys to select "SYSTEM" and press the
/ keys to select "TRIGER" and press the
/ keys to enter the editing mode, and the sub-
key for two seconds or more to enter the
key.
ZW-8000/7000/5000
User's Manual