Wiring; 32-Pole Extension Connector - Omron ZW-8000 Series User Manual

2-4 Wiring

32-pole extension connector

Used for judgment output, control input, etc.
Compatible connector: FX2B series (Hirose Electric Co., Ltd.)
A parallel cable (ZW-XCP2E) for a 32-pole extension connector with 2 m wire is included.
Important
Cut the unnecessary signal lines so that they do not touch other signal lines. Use the wire length of 2m or less.
78

Wiring

(*1 )
Color Signal name No.
Blue COM_IN1 B16
Green TIMING B15
Yellow RESET B14
Orange ZERO B13
Red LIGHT OFF B12
Brown COM_OUT1 B11
Black HIGH B10
White PASS B9
Gray LOW B8
Purple ALARM B7
Blue BUSY B6
Green ENABLE B5
Yellow COM_OUT2 B4
Orange BANK_OUT1 B3
Red BANK_OUT2 B2
Brown BANK_OUT3 B1
*1 Indicates ZW-XCP2E wire color.
(*2 )
Signal name
A16 COM_IN2
A15 SYNC/TRIG
A14 NC
A13 NC
A12 NC
A11 COM_OUT3
A10 STABILITY
A9 LOGERR
A8 LOGSTAT
A7 SYNCFLG/
TRIGBUSY
A6 TASKSTAT
A5 COM_IN3
A4 BANK_SEL1
A3 BANK_SEL2
A2 BANK_SEL3
A1 LOGGING
ZW-8000/7000/5000
(*1 )
Color
Blue
Green
Yellow
Orange
Red
Brown
Black
White
Gray
Purple
Blue
Green
Yellow
Orange
Red
Brown
User's Manual