Omron ZW-8000 Series User Manual page 260

Setting the Zero Reset Mode
Setting the Zero Reset Type p.171
As an example, here is an explanation of the procedure for selecting the "REAL" zero reset type setting.
Operating procedure
Steps Key operation
1 to 5 For moving to "ZERO", see steps 1 to 5 in p.256.
6
7
8
258
Setting the Output Conditions
Display Description
Press the
key.
Select the zero reset mode.
REAL: Real
HOLD: Hold
Select "REAL" as the zero reset type.
The current setting value is displayed on the sub-display.
Press
In this example, select "REAL" and press the
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
/ keys to select "TYPE" and press the
/ key to enter editing mode and the sub-display blinks.
key for two seconds or more to enter the
key.
ZW-8000/7000/5000
User's Manual