Attaching The Strap To Protective Cap - Omron ZW-8000 Series User Manual

Attaching the Strap to Protective Cap

1
ZW-8000 Series: Attach the supplied protective cap to the fiber cable.
ZW-7000 Series: Attach the strap supplied with the protective cap to the fiber cable.
ZW-5000 Series: Attach the supplied protective cap to the fiber cable.
●
ZW-8000/5000 Series
Important
• When attaching the protective cap with its strap to the fiber cable, be careful so as the protective cap or strap do not
catch when you thread it.
• When removing the fiber cable from the Sensor Controller, make sure its protective cap is attached.
Leaving the cable unprotected can let dirt get on the end surface and cause performance deterioration.
• If you do not use the protective cap, store the cap.
34
Basic Operations for Displaying Measurement Results
●
ZW-7000 Series
ZW-8000/7000/5000
User's Manual