1
Set the operating mode to the FUNC mode.
3-2 Switching operation modes p.98
Multi View Explore
→ Edit pane
→ I/O Setting Screen
2
Select the output value at [Output value
when clamp].
Multi View Explore
→ Edit pane
→ I/O Setting Screen
3
Select the output value at [Output value
when clamp].
Note
Clamp values can also be set with key operations on the Sensor Controller.
Displacement Sensor ZW-8000/7000/5000 series Confocal Fiber Type Displacement Sensor User's
Manual (Z362) "6-1 Connecting Parallel I/O"
ZW-8000/7000/5000
User's Manual
: [Bank Group] | [(Bank Data Name)] (double click)
: [I/O Settings] icon (
: [Analog output]
: [Bank Group] | [(Bank Data Name)] (double click)
: [I/O Settings] icon (
: [Digital output]
)
)
181
Setting I/O