Omron ZW-8000 Series User Manual page 292

ZW-S7010
Dielectric strength Between case and all terminals: 1000 VAC, 50/60 Hz, 1 min
(Calibration ROM)
Weight Fiber cable length 0.3m Approx. 170g
Fiber cable length 2m Approx. 180g
Accessories 1 Calibration ROM fixing screws (M2 × 5 mm), Fiber
cable protective cap (1), Strap (2), Instruction Manual,
Precautions
*1: Indicates the distance from the front of the sensor head. The pen-shaped right angle type has a maximum individual difference of ±0.15
mm in the distance from the front of the sensor head.
*2: The measurement range is higher 28
*3: Capacity value when OMRON standard mirror surface target is measured at the measurement center distance as the average of 16,384
times
When connected with the Sensor Controller for the Export Control Trade Ordinance (ZW-7000T), the minimum resolution is 0.25
regardless of the Sensor head or setting condition.
*4: Material setting for the OMRON standard mirror surface target: Error from an ideal straight line when measuring on mirror surface.
*5: Capacity value defined by 1/e
*6: When an extension fiber cable of 10 m or longer is connected, the setting rage of the measurement cycle (exposure time) changes. For
details, refer to "Setting the Measurement Cycle" p.122 in this manual.
*7: Actual value of the change in measurement value at the measurement center distance when fastened with an aluminum jig between the
Sensor Head and the target, and with the Sensor Head and the Sensor Controller set in the same temperature environment.
The value in parentheses is the actual value when using an SUS304 jig.
When measuring the thickness, the value is calculated from the difference between the heights of the surface and rear surface, so there is
no effect on the temperature change.
● ZW-S5010/S5020/S5030/SP5007/SP5010/SPR5007/SPR5010
Sensor controller
Sensor head type
Measurement center dis-
*1
tance
Measuring range
*2
Static resolution
*3
Linearity
*4
Spot diameter
*5
Measuring cycle
Operating ambient illumi-
nation
Ambient temperature
range
Ambient humidity range
Degree of protection
Vibration resistance
(destructive)
Shock resistance
(destructive)
Temperature characteris-
*6
tic
LED safety
Material
Fiber cable length
290
Specifications and External Dimensions
ZW-S7020 ZW-S7030
μ
s than measurement cycle.
2
(13.5%) of the peak optical intensity of the measurement wavelength.
ZW-S5010 ZW-S5020 ZW-S5030
ZW-5000@
Square-shaped straight type
10 mm 20 mm 30 mm
±0.5 mm ±1 mm ±2 mm
0.004 μm 0.008 μm 0.016 μm
±0.45 μm ±0.9 μm ±2.0 μm
9 μm dia. 13 μm dia. 18 μm dia.
80 μs to 1,600 μs
Illumination on object surface max.30000 Lx: (incandescent light)
Operation: 0 to 50°C, Storage: -15 to +60°C
(No freezing and condensation)
Operation/storage: 35 to 85% (No condensation)
IP40 (IEC60529)
10 to 150 Hz (half amplitude 0.35 mm), 80 mins in each of X/Y/Z directions
2
150 m/s , 6 direction, 3 times each (up/down, left/right, forward/backward)
0.6 μm/°C 1.1 μm/°C 1.8 μm/°C
(0.2 μm/°C) (0.5 μm/°C) (1.0 μm/°C)
Risk Group1 (IEC62471)
Chassis: aluminum die cast
Fiber cable sheath: PVC
Calibration ROM: PC
0.3 m, 2 m (flex-resistant cable)
ZW-S7040 ZW-SP7007 ZW-SP7010 ZW-SPR7007 ZW-SPR7010
Fiber cable length 0.3m
Approx. 27 g
Fiber cable length 2m
Approx. 37 g
Installation plate (1), 4 unit fixing screws (M2 × 10
mm), 1 Calibration ROM fixing screw (M2 × 5 mm),
Fiber cable protective cap (1), Strap (2), Instruction
Manual, Precautions
ZW-SP5007 ZW-SP5010
Pen-shaped straight type
7 mm 10 mm
±0.3 mm ±0.7 mm
0.004 μm
0.006μm
±0.45 μm ±0.7 μm
13 μm dia. 18 μm dia.
0.8 μm/°C 0.8 μm/°C
(0.4 μm/°C) (0.4 μm/°C)
Chassis: SUS
Fiber cable sheath: PVC
Calibration ROM: PC
Mounting Plate: Aluminum
Fiber cable length 0.3m
Approx. 31 g
Fiber cable length 2m
Approx. 41 g
μ
m,
ZW-SPR5007 ZW-SPR5010
Pen-shaped right angle type
7 mm 10 mm
±0.3 mm ±0.7 mm
0.006 μm 0.009 μm
±0.7 μm ±1.1 μm
15 μm dia. 20 μm dia.
0.8 μm/°C 0.8 μm/°C
(0.4 μm/°C) (0.4 μm/°C)
Chassis: SUS, aluminum
Fiber cable sheath: PVC
Calibration ROM: PC
Mounting Plate: Aluminum
ZW-8000/7000/5000
User's Manual