Omron ZW-8000 Series User Manual page 182

1
Set the operating mode to the FUNC mode.
3-2 Switching operation modes p.98
 Multi View Explore
→ Edit pane
→ I/O Setting Screen
2
Select the operation during non-
measurement at [Non-Measurement
Setting].
3
With ZW-8000@, set [Keep count
specification flag], [Keep count] and
[Number of restorations].
Note
The operations for when measurement is not possible can also be set with key operations on the Sensor Controller.
Displacement Sensor ZW-8000/7000/5000 series Confocal Fiber Type Displacement Sensor User's
Manual (Z362) "6-1 Connecting Parallel I/O"
Setting the Clamp Value
Set the clamp value to output when "Clamp" is selected as processing when measurement is not possible.
Item Setting item
Analog output Clamp output
Digital output Clamp output
180
Setting I/O
: [Bank Group] | [(Bank Data Name)] (double click)
: [I/O Settings] icon (
: [Non-Measurement Setting]
Setting value
When the analog output destination is set to current
MIN (approx. 3.4mA)/4 to 20mA (1mA increments)/
MAX (default value: approx. 21mA)
When the analog output destination is set to voltage
MIN (approx. -10.8V)/-10 to +10V (1V increments)/
MAX (default value: approx. 10.8V)
-2147.483648(0x80000000) mm (default value)
-999.999999(0xC4653601) mm
0 mm
999.999999(0x3B9AC9FF) mm
2147.483647(0x7FFFFFFF) mm
)
Description
Select the current value/voltage value at
clamp output.
Set the digital value for clamp output.
ZW-8000/7000/5000
User's Manual