5-5 Control input signal with PC tool
Following input signal can be controlled with PC tool.
• LIGHT-OFF
• TIMING
• RESET
• ZERO
Multi view Explore
Multi view Explore
→ Edit Window
1
[I/O input] is opened.
2
If each button is clicked, the Sensor
Controller is controlled as corresponding
input signal is turned ON.
While the button is clicked , corresponding input
signal is status ON.
If the button is clicked again, the input signal is
turned OFF.
Button
LIGHT-OFF
TIMING
RESET
ZERO
Note
Some adjustments can only be made while in FUNC mode.
When in RUN Mode, [I/O input] is not displayed.
198
Control input signal with PC tool
: [Device Group]| [(Sensor Name)] (right click)| [Sensing monitor]
: [Device Group]| [(Sensor Name)] (double click)
: [Online]-[Monitoring]-[Sensing monitor start]
Effect
The white LED is turned OFF.
The TIMING input is turned ON.
The RESET input is turned ON.
The ZERO input is turned ON.
ZW-8000/7000/5000
User's Manual