Omron ZW-8000 Series User Manual page 43

• Contact
[Request for an Estimate]
URL http://www.ntt-at.com/product/optical_cleaner/Distributors.html
[Technical and other inquiries]
Company NTT Advanced Technology Corporation
Address Muza Kawasaki Central Tower, 1310
Omiya-cho Saiwai-ku, Kawasaki-shi,
Kanagawa, 212-0014, Japan
TEL +81 44 589 5894
URL http://www.ntt-at.com/product/optical_cleaner/Distributors.html
• When you remove the fiber cable from Sensor Controller, make sure to attach the protective cap. If you do not
attach it, it is possible that some contaminants may have adhered and may cause degradation of performance.
• Calibrate the Sensor Head after removing and inserting a fiber cable.
Calibrating Sensor Head p.48
• For checking the fiber is broken, confirm the followings.
Confirm by looking the Sensor head is lighting with connecting to Sensor Controller. To put the diffraction, i.e.. a
paper to around the measurement center of Sensor head, you can confirm by looking.
When the measurement of the high reflection, you may not confirm by looking due to adjustment of intensity
automatically.
• Cleaning the fiber connector and fiber cable using ZW-XCL, follow the procedures.
Cleaning the fiber connector and fiber cable using ZW-XCL p.70
ZW-8000/7000/5000
User's Manual
Basic Operations for Displaying Measurement Results
41