Setting Sensing; Set The Measurement Cycle - Omron ZW-8000 Series User Manual

7-6 Setting Sensing

Set the Measurement cycle

Setting the Measurement Cycle p.122
As an example, here is an explanation of the procedure for setting the measurement cycle to "400 ms".
Operating procedure
Steps Key operation
1
2
3
4
5
ZW-8000/7000/5000
User's Manual
Display Description
Press and hold the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
Press the
key.
Press the
key.
Set the measurement cycle.
Press
blinks.
To edit numerical values, use the
In this example, select "000400" and press the
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
key for two seconds or more to enter the
/ keys to select "SENS" and press the
/ keys to select "CYCLE" and press the
key to enter the editing mode, and the sub-display
/ /
key for two seconds or more to enter the
/ keys.
key.
229

Setting Sensing