Setting Exposure Time Control Mode - Omron ZW-8000 Series User Manual

Setting Exposure Time Control Mode

Setting Light Exposure Time Control Mode p.129
As an example, here is an explanation of the procedure for setting the exposure time control mode to "AUTO"
and control edge of light adjustment to "measurement area 1".
Operating procedure
Steps Key operation
1
2
3
4
5
6
232
Setting Sensing
Display Description
Press and hold the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
Press the
key.
Press the
key.
Select the exposure time control mode.
AUTO: Automatic
MANUAL: Fixed
The current setting value is displayed on the sub-display.
Press
In this example, select "AUTO" and press the
Set the Control edge.
In this example, "ADJ.SUR" is displayed on the main display, and the
current setting value is displayed on the sub-display.
Press
blinks.
To edit numerical values, use the
In this example, select "EDGE1" and press the
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
key for two seconds or more to enter the
/ keys to select "SENS" and press the
/ keys to select "LIGHT" and press the
/ key to enter editing mode and the sub-display blinks.
key to enter the editing mode, and the sub-display
/
key for two seconds or more to enter the
key.
/ / keys.
key.
ZW-8000/7000/5000
User's Manual