IBM Flex System p270 Compute Node Installation And Service Manual page 270

CA00D020 • CA00E10A
CA00D020
Explanation: About to download the run the SLIC loader (IOP-less boot)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D021
Explanation: About to download the run the IO Reporter (for VPD collection)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E101
Explanation: Create RTAS node
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E102
Explanation: Load and initialize RTAS
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E105
Explanation: Transfer control to operating system (normal mode boot)
Response: Go to Boot problem resolution.
CA00E10A
Explanation: Load RTAS device tree
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
258
Power Systems: IBM Flex System p270 Compute Node Installation and Service Guide