IBM Flex System p270 Compute Node Installation And Service Manual page 234

BA340005 • BA340008
BA340005
Explanation: An internal firmware error occurred; the location code mapping table was corrupted.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA340006
Explanation: An LP (logical partition) event communication failure occurred reading the system initiator capability
data from the service processor.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA340007
Explanation: An internal firmware error occurred; the open fabric manager system initiator capability data was
corrupted.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA340008
Explanation: An internal firmware error occurred; the open fabric manager system initiator capability data version
was not correct.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
222
Power Systems: IBM Flex System p270 Compute Node Installation and Service Guide