IBM Flex System p270 Compute Node Installation And Service Manual page 181

B7005305 • B7005602
B7005305
Explanation: There are no remaining World Wide Port Names (WWPN).
Response: Refer to https://www-912.ibm.com/supporthome.nsf/document/51455410
B7005306
Explanation: There is insufficient licensed memory for firmware to support the manufacturing default configuration.
Response: Contact IBM support or marketing representative to obtain an activation code to license more memory in
the system.
B7005400
Explanation: System firmware detected a problem with a processor.
Response: Replace the system-board and chassis assembly, as described in Replacing the system-board and chassis
assembly.
B7005442
Explanation: System firmware detected an error.
Response: Replace the system-board and chassis assembly, as described in Replacing the system-board and chassis
assembly.
B70054DD
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7005600
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7005601
Explanation: System firmware failure. There was a problem initializing, reading, or using system location codes.
Response: Go to Isolating firmware problems.
B7005602
Explanation: The system has out-of-date VPD LIDs.
Response: Check for server firmware updates; then, install the updates if available.
169
Chapter 8. Troubleshooting